Wednesday, January 23, 2013

Install Android 4.2.1 CM10.1 Nightly Jelly Bean on Acer Iconia Tab A700

Install Android 4.2.1 CM10.1 Nightly Jelly Bean on Acer Iconia Tab A700 ... Now user can install Android 4.2.1 CM10.1 Nightly Jelly Bean on Acer Iconia Tab A700 .

Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.

Installed all your USB DRIVERS FOR Acer Iconia Tab A700 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone or tablet with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone or tablet will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone or tablet will be dead permanently.
3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your tablet should be Unlocked. 

Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.

Step 1
Download Android 4.2.1 CM10.1 Nightly and Google Apps for Iconia A700 on your PC, if you haven’t already.

Step 2
Connect and mount your Acer Iconia A700 USB memory on your computer using the USB cable.

Step 3
Now copy/paste the CM10.1 ROM file and Google Apps zip files to your SD card. Make sure the files are in the SD card root.

Step 4
Then turn OFF your tablet.

Step 5
Now to get in the Bootloader Mode. Turn ON the tablet while in the landscape mode and press the Volume Down + Power buttons.

Step 6
Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

Step 7
In ClockworkMod recovery, wipe data first. Then scroll down to “flash zip from SD card” and press the Power button to select it.

Step 8
Press the Power button again and select “choose zip from sdcard”.

Step 9
Now using your volume keys, navigate to CM10.1 ROM zip and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

NOTE: Repeat this step for the Google Apps zip file as well.

Step 10 
After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. The phone will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Acer Iconia A700 should have Android 4.2.1 CM10.1 Nightly Jelly Bean firmware installed on your tablet! Go to Settings >About tablet to verify.

Now Android 4.2.1 CM10.1 Nightly Jelly Bean installed on Acer Iconia Tab A700 .

No comments:

Post a Comment