Tuesday, January 15, 2013

Install Android 4.2.1 Tablet UI Jelly Bean on Nexus 10

Install Android 4.2.1 Tablet UI Jelly Bean on Nexus 10...  Now user can install Android 4.2.1 Tablet UI Jelly Bean on Nexus 10.

Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.

Android 4.2.1 Tablet UI Jelly Bean ROM Details:

This ROM is a simple AOSP ROM that brings full tablet UI to your Nexus 10. However, here is a quick features list most of you would be interested in:

Pretty much Stock AOSP except some Mods and Nexus 10 required proprietary binaries.
Full Tablet UI
Native USB OTG support
Advanced Power Menu
Stable for everyday use

Installed all your USB DRIVERS FOR Samsung Nexus 10 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android tablet with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your tablet will be off during flashing ROMs or installing mods and updates due to low battery. Then your Tablet will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your tablet should be Unlocked.

 Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.

Step 1
 Download Android 4.2.1 Tablet UI Jelly Bean and Google Apps for Nexus 10 on your PC, if you haven’t already.

Step 2
 Connect and mount your Nexus 10 USB memory on your computer using the USB cable.

Step 3
 Now copy/paste the Android 4.2.1 ROM zip and Google Apps zip files to your SD card. Make sure the files are in the SD card root.

Step 4
 Then turn OFF your tablet.

Step 5
 Now to get in the Bootloader Mode. Turn ON the tablet while pressing and holding the Volume Up + Volume Down and Power buttons.

Step 6
 Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

Step 7
 In ClockworkMod recovery, wipe data first. Then scroll down to “flash zip from SD card” and press the Power button to select it.

Step 8
 Press the Power button again and select “choose zip from sdcard”.

Step 9
 Now using your volume keys, navigate to Android 4.2.1 ROM zip file and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

NOTE: Repeat this step for the Google Apps zip file as well.

Step 10
 After the installation completes, go to “+++++Go Back” and reboot the tablet by selecting reboot system nowfrom the recovery menu. The tablet will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Nexus 10 should now have Android 4.2.1 Tablet UI Jelly Bean firmware installed on your tablet! Go to Settings >About phone to verify.
Now Android 4.2.1 Tablet UI Jelly Bean installed on Nexus 10.

No comments:

Post a Comment