Tuesday, January 22, 2013

Install CM10.1 Android 4.2.1 Nightly Jelly Bean on Nexus 10

Install CM10.1 Android 4.2.1 Nightly Jelly Bean on Nexus 10 ... Now user can install CM10.1 Android 4.2.1 Nightly Jelly Bean on Nexus 10 .

Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.




 Installed all your USB DRIVERS FOR on Nexus 10 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone or tablet with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone or tablet will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone or tablet will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your tablet should be Unlocked.  

Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.



Step 1
Download CM10.1 Android 4.2.1 Nightly Jelly Bean and Google Apps for Nexus 10 on your PC, if you haven’t already.

Step 2
Connect and mount your Nexus 10 USB memory on your computer using the USB cable.

Step 3
Now copy/paste the Android 4.2.1 ROM zip and Google Apps zip files to your SD card. Make sure the files are in the SD card root.

Step 4
Then turn OFF your tablet.

Step 5
Now to get in the Bootloader Mode. Turn ON the tablet while pressing and holding the Volume Up + Volume Down and Power buttons.

Step 6
Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

Step 7
In ClockworkMod recovery, wipe data first. Then scroll down to “flash zip from SD card” and press the Power button to select it.

Step 8
Press the Power button again and select “choose zip from sdcard”.

Step 9
Now using your volume keys, navigate to Android 4.2.1 ROM zip file and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

NOTE: Repeat this step for the Google Apps zip file as well.

Step 10
After the installation completes, go to “+++++Go Back” and reboot the tablet by selecting “reboot system now” from the recovery menu. The tablet will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Nexus 10 should now have Android 4.2.1 CM10.1 firmware installed on your tablet! Go to Settings >About phone to verify.


Now CM10.1 Android 4.2.1 Nightly Jelly Bean installed on Nexus 10 .

No comments:

Post a Comment