Friday, January 18, 2013

Root Galaxy Tab 2 10.1 P5113 on Android 4.1.1 official stock firmware

Root Galaxy Tab 2 10.1 P5113 on Android 4.1.1 official stock firmware...  Now user can root Galaxy Tab 2 10.1 P5113 on Android 4.1.1 official stock firmware.

 Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.




Installed all your USB DRIVERS FOR Galaxy Tab 2 10.1 P5113 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone or tablet with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone or tablet will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone or tablet will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your tablet or phone should be Unlocked.

 

Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.

Step 1
 Download Root Package – CF-Auto-Root for Samsung Galaxy Tab 2 10.1 to your computer and extract the zip file.

Step 2
 Download ODIN v1.85 which will help you to root Android 4.1.1 on Samsung Galaxy Tab 2 10.1 P5113.

Step 3
 Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4
 Make sure you have your Samsung Galaxy Tab 2 10.1 USB drivers installed on your computer.

Step 5
 Open ODIN on your computer. Connect your tablet to your computer while your tablet is in the Download Mode.

Step 6
 If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7
 Now select the file that you have to flash/install on your tablet. This file will be found from the extracted file in Step 1.
  • Click on ‘PDA’ and select the file ‘CF-Auto-Root-espresso10wifi-espresso10wifibby-gtp5113.zip‘.
Step 8
 In ODIN, check the Auto Reboot and F. Reset Time options, if not already.

Step 9
 Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10
 After the installation is completed, your tablet will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11
 After you see the home screen, unplug your tablet from the computer.

NOTE: Sometimes the device does NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.
OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:
Step 11 - Pull out the battery (or keep holding the Power button) to turn OFF the tablet forcefully.
Step 12 - Now boot (turn ON your tablet) with Volume Down + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.
That’s it! Your Samsung Galaxy Tab 2 10.1 has now been rooted on Android 4.1.1 / 4.0.4 official software update. Check for the SuperSU app in your apps list to verify.

Now  Galaxy Tab 2 10.1 P5113 on Android 4.1.1 official stock firmware.

No comments:

Post a Comment