Saturday, January 26, 2013

Root XWLS8 Android 4.1.2 Jelly Bean on Galaxy S2 I9100

Root XWLS8 Android 4.1.2 Jelly Bean on Galaxy S2 I9100... Now user can root XWLS8 Android 4.1.2 Jelly Bean on Galaxy S2 I9100.

Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.



Installed all your USB DRIVERS FOR Galaxy S2 I9100 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone or tablet with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone or tablet will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone or tablet will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your tablet should be Unlocked. 





Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.



Step 1
Download Root Kernel I9100XWLS8 for Galaxy S2 to your computer.

Step 2
Download ODIN v1.85 which will help you to root Android 4.1.2 on Samsung Galaxy S2 I9100.

Step 3
Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4
Make sure you have your Galaxy S2 USB drivers installed on your computer.

Step 5
Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6
If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7
Now select the files that you have to flash/install on your phone. This file is to be found from the downloaded file in Step 1.

    Click on ‘PDA’ and select the file ‘Siyah-s2-v6.0b4.tar’.

Step 8
In ODIN, check the Auto Reboot and F. Reset Time options.

Step 9
Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10
After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy S II has now been rooted on Android 4.1.2 build XWLS8 software update. Check for the Superuser app in your apps list to verify.

Now XWLS8 Android 4.1.2 Jelly Bean rooted on Galaxy S2 I9100.

2 comments: