How to root KKJLL5 Android 4.1.2 on Samsung Galaxy S3 SHV-E210K

How to root KKJLL5 Android 4.1.2 on Samsung Galaxy S3 SHV-E210K ... Now user can root KKJLL5 Android 4.1.2 on Samsung Galaxy S3 SHV-E210K.

Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.

Installed all your USB DRIVERS FOR Samsung Galaxy S3 SHV-E210K through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your Phone should be Unlocked.

Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.

Step 1
Download Root KKJLL5 Android 4.1.2 for Samsung Galaxy S3 to your computer and extract the zip file.

Step 2
Download ODIN v1.85 which will help you to root KKJLL5 Android 4.1.2 on Samsung Samsung Galaxy S3 SHV-E210K.

Step 3
Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4
Make sure you have your Samsung Galaxy S3 USB drivers installed on your computer.

Step 5
Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6
If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7
Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

    Click on ‘PDA’ and select the file ‘CF-Auto-Root-c1ktt-shve210k.tar.md5‘.

Step 8
In ODIN, check the Auto Reboot and F. Reset Time options, if not already.

Step 9
Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10
After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.

Step 11
After you see the home screen, unplug your phone from the computer.

Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:

Step 11 - Pull out the battery to turn OFF the phone forcefully.

Step 12 - Now boot (turn ON your phone) with Volume Up + Home + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.

That’s it! Your Samsung Galaxy S III has now been rooted on KKJLL5 Android 4.1.2 official software update. Check for the SuperSU app in your apps list to verify.

Now KKJLL5 Android 4.1.2 rooted on Samsung Galaxy S3 SHV-E210K.