How to root UBLS4 Android 4.1.2 on Galaxy Note N7000 official firmware

How to root UBLS4 Android 4.1.2 on Galaxy Note N7000 official firmware ... Now user can root UBLS4 Android 4.1.2 on Galaxy Note N7000 official firmware.

Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.

Root UBLS4 Android 4.1.2 – HyperNote Kernel Method Details:

•     Built from latest samsung Note sources
•     Multiboot InitramFS for all rom types
•     Patches for full functionality for all rom types
•     Supports Touchwiz ICS, AOKP, AOSP, CM9 , CM10, JellyBean, ParanoidAndroid, MIUI roms
•     OC/UV version and a Standard frequencies/voltages version
•     Full root
•     Noop scheduler default
•     Tweaked OnDemand governor default
•     Lots of IO tweaks
•     Lots of kernel scheduler tweaks
•     Adjusted all cpu voltage tables (OC kernel only)
•     Realtime cpu temperature, board temperature readouts and VoltGroup information in settings>about>kernel version
•     Optimised VM memory setting
•     Optimised Global block readahead
•     CIFS support with UTF8
•     Voltages and frequencies now in userspace for Voltage Coltrol app / AOKP direct support

Installed all your USB DRIVERS FOR Galaxy Note N7000 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your Phone should be Unlocked.

Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.




Step 1
Download Root (GL_HYDRACORE_v7_STD.zip) N7000UBLS4 for Galaxy Note to your computer.

Step 2
Download ODIN v1.85 which will help you to install Android 4.0.3 on Samsung Galaxy Note N7000.

Step 3
Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button, till you see the Samsung logo or the construction Android robot and a triangle. This is the Download Mode.

Step 4
Make sure you have your Galaxy Note USB drivers installed on your computer.

Step 5
Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.

Step 6
If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7
Now select the root kernel file that you have to flash/install on your phone. This is the file you downloaded in Step 1.

    Click on ‘PDA’ and select the GL_HYDRACORE_v7_STD.zip file.

Step 8
In ODIN, check the Auto Reboot and F. Reset Time options.

Step 9
Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10
After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

That’s it. Your Samsung Galaxy Note has now been rooted on Android 4.1.2 UBLS4 software update. Check for the Superuser app in your apps list to verify.




Now UBLS4 Android 4.1.2 rooted on Galaxy Note N7000 official firmware.