Root Galaxy Tab 2 10.1 P5110 on ZCCLL1 Android 4.1.1 official stock firmware

Root Galaxy Tab 2 10.1 P5110 on ZCCLL1 Android 4.1.1 official stock firmware... Now user can root Galaxy Tab 2 10.1 P5110 on ZCCLL1 Android 4.1.1 official stock firmware using ClockworkMod recovery.

 Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.

Installed all your USB DRIVERS FOR Galaxy Tab 2 10.1 P5110 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your tablet should be Unlocked.

Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.

Step 1
 Install ClockworkMod Recovery on Galaxy Tab 2 10.1. Ignore this if you already have ClockworkMod recovery installed.

Step 2
 Download Root Package (cwm-root-gtab2a.zip) for Galaxy Tab 2 10.1 to your computer.

Step 3
 Connect and mount your Galaxy Tab 2 10.1 USB memory on your computer using the USB cable.

Step 4
 Now copy/paste the downloaded cwm-root-gtab2a.zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 5
 Then turn OFF your tablet and disconnect from the USB cable.

Step 6
 Now to get in the Recovery Mode. Switch ON the tablet while pressing and holding Volume Down + Power buttons together.

Step 7
 In ClockworkMod recovery, scroll down to “flash zip from SD card” and press the Power button to select it.

Step 8
 Press the Power button again and select “choose zip from sdcard”.

Step 9
 Now using your volume keys, navigate to the cwm-root-gtab2a.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 10
 After the installation completes, go to “+++++Go Back” and reboot the tablet by selecting “reboot system now” from the recovery menu. The tablet will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it. Your Samsung Galaxy Tab 2 10.1 has now been rooted on ZCCLL1 Android 4.1.1 Jelly Bean firmware. Check for the SuperSU app in your apps list to confirm.

Now Galaxy Tab 2 10.1 P5110 rooted on ZCCLL1 Android 4.1.1 official stock firmware using ClockworkMod recovery.