Update Galaxy Note 10.1 N8013 to UEUCMA3 Android 4.1.2 official firmware

Update Galaxy Note 10.1 N8013 to UEUCMA3 Android 4.1.2 official firmware... Now user can
update Galaxy Note 10.1 N8013 to UEUCMA3 Android 4.1.2 official firmware.

Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.

 Android 4.1.2 UEUCMA3 Firmware Details:

PDA: N8013UEUCMA3
CSC: N8013XARCMA3
Version: 4.1.2
Date: 2013-01-10

Installed all your USB DRIVERS FOR Galaxy Note 10.1 N8013 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone or tablet with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone or tablet will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone or tablet will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your tablet should be Unlocked.  

Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.

Step 1
 Download Android 4.1.2 N8013UEUCMA3 for Galaxy Note 10.1 to your computer and extract the zip file.

Step 2
 Download ODIN v1.85 which will help you to install Android 4.1.2 on Samsung Galaxy Note 10.1 N8013.

Step 3
 Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Down + Power buttons together, till you see the Samsung logo or the construction Android robot and a triangle. This is the Download Mode.

Step 4
 Make sure you have your Galaxy Note 10.1 USB drivers installed on your computer.

Step 5
 Open ODIN on your computer. Connect Galaxy Note 10.1 to your computer while the tablet is in the Download Mode.

Step 6
 If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 
 Now select the files that you have to flash/install on your tablet. These files are to be found from the extracted files in Step 1.

• Click on ‘PDA’ and select file with ‘CODE’ in its name.
• Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
• Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
• Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8
 In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9
 Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10
 After the installation is completed, your tablet will restart. After you see the home screen, unplug your tablet from the computer.

That’s it. Your Samsung Galaxy Note 10.1 has now been updated to UEUCMA3 Android 4.1.2 firmware. Go to Settings > About tablet to verify.

Now Galaxy Note 10.1 N8013 to UEUCMA3 Android 4.1.2 official firmware.