Update Galaxy Tab 8.9 P7300 to XXLQ6 Android 4.0.4 official firmware

Update Galaxy Tab 8.9 P7300 to XXLQ6 Android 4.0.4 official firmware... Now user can update Galaxy Tab 8.9 P7300 to XXLQ6 Android 4.0.4 official firmware using ODIN.

Here is the complete tutorial how you can it. Before going to forward, do not forget to backup all your personal data and apps.

Android 4.0.4 UBBLJ1 Firmware Details:

• PDA: P7300XXLQ6
• CSC: P7300OJVLP4
• Version: 4.0.4
• Date: 2012-12-11
• Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom 

Installed all your USB DRIVERS FOR Galaxy Tab 8.9 P7300 through PC. Some things you should keep in mind.

1. Enable the Debugging Mode. By enable the debugging mode you can connect own android phone with PC.

2. You should check your battery. Your batter should be 80% to 85% charges. If your phone will be off during flashing ROMs or installing mods and updates due to low battery. Then your Phone will be dead permanently.

3. As, i told you. You should back up all your date. You will need it for new ROM.

4. Your Phone should be Unlocked.

 Now we move forward and important part.

Here is the complete detail in different steps.

Read the all steps carefully.

Step 1
 Download Android 4.0.4 P7300XXLQ6 for Galaxy Tab 8.9 to your computer and extract the zip file.

Step 2
 Download ODIN v1.85 which will help you to install Android 4.0.4 on Samsung Galaxy Tab 8.9 P7300.

Step 3
Switch OFF your tablet. Now to get in the Download Mode. Turn ON the tablet while pressing and holding the Volume Down and Power buttons, till you see the Samsung logo or the construction Android robot and a triangle. This is the Download Mode.

Step 4
 Make sure you have your Galaxy Tab 8.9 USB drivers installed on your computer.

Step 5
 Open ODIN on your computer. Connect your tablet to your computer while it is in the Download Mode.

Step 6
 If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7
 Now select the files that you have to flash/install on your tablet. These files are to be found from the extracted files in Step 1.

Click on ‘PDA’ and select file with ‘CODE’ in its name.
Click on ‘tablet’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.

Step 8
 In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.

Step 9
 Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10
 After the installation is completed, your tablet will restart. After you see the home screen, unplug your tablet from the computer.

That’s it. Your Samsung Galaxy Tab 8.9 has now been updated to Android 4.0.4 XXLQ6 software update. Go to Settings > About tablet to verify.

Now Galaxy Tab 8.9 P7300 updated to XXLQ6 Android 4.0.4 official firmware using ODIN.